How to apply your ilashes
I recommend reading start to finish before you do
anything
Step 1: Cut and Curl
Measure the strip of ilashes along each headlight.
Using kitchen scissors, trim off any excess from the outer edge of each ilash.
(most cars won’t need this)
To curl your ilashes: using a pen and your thumb
to apply pressure curl the ilashes, similar to the way you’d curl ribbon on a
gift. Another option is to roll individual ilashes around hairspray can or
similar to achieve the curled effect.
Step 2: Preparing the area
This is the most important bit! Give your headlight a quick clean, then completely dry with a paper towel.
Step 3: Apply ilash strip
Carefully remove the backing of the sticky strip from your first ilash. Apply at the outer corner of your headlight first: using your fingers, firmly press the ilash into place. Press the rest of the ilash into place in one smooth action, trying to avoid any bumps.
Step 4: Finish the look
No need for mascara, your ilashes speak for themselves...
Send your photos/comments to
ilashesinfo@gmail.com to be added to the site!
Blinking marvellous :)
Blinking marvellous :)
*From feedback from other
iLashes users- if you leave the adhesive to dry overnight- the ilashes will stand up much longer to the elements*
Step 1: Cut Back
Measure the strip of lashes to your own eye. Using small straight-ended scissors, trim off any excess from the outer edge.
Step 2: Make Them Stick
Carefully apply a very thin line of glue to the base of the strip. Allow the glue to start to dry and become ‘tacky’ before you move on to the next step.
Step 3: Apply Lash Strip
Using tweezers or your fingers, gently hold the false lash above your own. Apply at the outer corner of your eye first. Hold in place until the glue sticks.
Step 4: Finish The Look
Use eye shadow as liner to blend the false lashes with your own. Finish with a coat of mascara
